Fuente Sitop Psu 100L 24VDC/5A Estabilizador De Poder Supply - 6EP1333-1LB00 - Siemens
SKU 6EP1333-1LB00 · Unidad base: unit
Producto Siemens. Referencia del fabricante: 6EP1333-1LB00. SITOP PSU100L/1AC/24VDC/5A SITOP PSU100L 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A Características técnicas: Technical Product Detail Page: https://i.siemens.com/1P6EP1333-1LB00; product type designation: PSU100L; product designation: Power supply SITOP lite; type of current supply: 24 V/5 A; type of the power supply network: 1-phase AC; phase number: 1; voltage curve at input: AC; supply voltage at AC: Set by means of selector switch on the device; supply voltage: 120 V/230 V; input voltage 1 at AC: 93 ... 132 V; input voltage 2 at AC: 187 ... 264 V; ● at 50 Hz: 230 V.
Ingresa o regístrate para consultar el stock registrado.
Ingresar ↗La solicitud no reserva mercadería ni confirma un pedido.
Consultar ficha técnica ↗Características del producto
- Technical Product Detail Page
- https://i.siemens.com/1P6EP1333-1LB00
- product type designation
- PSU100L
- product designation
- Power supply SITOP lite
- type of current supply
- 24 V/5 A
- type of the power supply network
- 1-phase AC
- phase number
- 1
- voltage curve at input
- AC
- supply voltage at AC
- Set by means of selector switch on the device
- supply voltage
- 120 V/230 V
- input voltage 1 at AC
- 93 ... 132 V
- input voltage 2 at AC
- 187 ... 264 V
- ● at 50 Hz
- 230 V
- ● at 60 Hz
- 120 V
- line frequency
- 50/60 Hz
- wide range input
- No
- overvoltage overload capability
- 2.3 × Vin rated, 1.3 ms
- buffering time for rated value of the output current in the event of power failure minimum
- 20 ms
- operating condition of the mains buffering
- at Vin = 93/187 V
- ● at rated input voltage 120 V
- 2.1 A
- ● at rated input voltage 230 V
- 1.15 A
- current limitation of inrush current at 25 °C maximum
- 32 A
- ● typical
- 3 ms
- I2t value maximum
- 0.8 A²·s
- fuse protection type
- T 3,15 A/250 V (not accessible)
- fuse protection type in the feeder
- Recommended miniature circuit breaker: from 6 A characteristic C
- voltage curve at output
- Controlled, isolated DC voltage
- product function output voltage controlled
- Yes
- product function output voltage stabilized
- Yes
- output voltage at DC rated value
- 24 V
- ● at output 1 at DC rated value
- 24 V
- ● at output 1 at DC
- 24 V
- output voltage adjustable
- Yes; via potentiometer
- adjustable output voltage
- 22.8 ... 26.4 V
- relative overall tolerance of the voltage
- 3 %
- ● on slow fluctuation of input voltage
- 0.1 %
- ● on slow fluctuation of ohm loading
- 0.5 %
- ● maximum
- 150 mV
- display version for normal operation
- Green LED for 24 V OK
- behavior of the output voltage when switching on
- Overshoot of Vout approx. 4 %
- response delay maximum
- 1.5 s
- ● rated value
- 5 A
- ● rated range
- 0 ... 5 A; +45 ... +60 °C: Derating 2%/K
- supplied active power typical
- 120 W
- bridging of equipment
- Yes
- number of parallel-switched equipment resources for increasing the power
- 2
- efficiency in percent
- 86 %
- ● at rated output voltage for rated value of the output current typical
- 17 W
- relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical
- 0.3 %
- relative control precision of the output voltage at load step of resistive load 10/90/10 % typical
- 2 %
- ● load step 10 to 90% typical
- 0.4 ms
- ● load step 90 to 10% typical
- 0.4 ms
- design of the overvoltage protection
- < 33 V
- property of the output short-circuit proof
- Yes
- design of short-circuit protection
- Constant current characteristic
- galvanic isolation between input and output
- Yes
- galvanic isolation
- Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7)
- operating resource protection class
- Class I
- protection class IP
- IP20
- ● for emitted interference
- EN 55022 Class A
- ● for mains harmonics limitation
- -